How To Set Up Each Mode For The VRS 3-in-1
The Exxus VRS 3-in-1 is one of our classic devices—versatile, convenient, and efficient! This high-tech device is perfect for portable sessions and enjoying materials, like wax concentrates and essential oils. The VRS features three voltage settings (3.0V, 3.5V, 4.0V), A 15-second preheat functionality, and haptic feedback for vital information.
With so many modes to choose from, getting started may be a bit troublesome. Don’t worry though, we are here to guide you through every single step! Here’s how you set up each mode:
Nectar Collector Mode
First, start with the VRS battery and screw on the glass connector. Then, place the hydro tube on top of the glass connector. After, take the heating tip and attach it on the other side of the battery. Finally, take the cap off of the heating tip and begin your slurpin’ session!
Dab Rig Mode
Grab your glass connector and screw it onto the VRS battery. Then, attach the 14mm glass adapter on top of the connector. After, attach the ceramic atomizer on the opposite side. Finally, place the 14mm glass adapter on top of your water pipe to activate.
Oil Cartridge Mode
If you want to change your material and grab your favorite oil cartridge, simply place your cartridge on the 510-thread connection. Voila! The VRS can do it all in just seconds.
Relish the endless versatile puffs of your favorite concentrates and oils with the VRS. With a device like this, your sessions won’t get old! Make sure to check out our replacement parts for the VRS at our website, ExxusVape.com.