Dry Herb Vaporizers

Dry Herb Vaporizers
2 products
Sort
Dry herb vaporizers heat loose material in an oven rather than burning it, so the flavor comes through. The Mini and Mini Plus are both four inches tall and warm up in 30 seconds, and the Mini Plus takes a skillet for concentrate as well. Chambers and mouthpieces wear; spares are in dry herb replacement parts. Everything else is under vaporizers.
2 products
SALE
Full Color front view Exxus Vape Mini Plus Vaporizer on white background
Full Color top view Exxus Vape Mini Plus Vaporizer on white background
Exxus Vape Mini Plus Vaporizer
102 reviews
Exxus Vape Sale price$8999Regular price$9999 Save 10%
SALE
green dab rig mode side view Exxus Vape VRS 3 in 1 Vaporizer on white background
Black dab rig mode side view Exxus Vape VRS 3 in 1 Vaporizer on white background
Exxus Vape VRS 3 in 1 Vaporizer
44 reviews
Exxus Vape Sale price$6299Regular price$6999 Save 10%

Guides for Dry Herb Vaporizers

How Much Concentrate Should You Pack In Your Rig? How-To How Much Concentrate Should You Pack In Your Rig? Worried about under or over loading your dab rig? Exxus Vape is coming to the rescue with our break down of how to pr... how-to • 5 min Explore → How To Properly Pack Your Dry Herb Vaporizer How-To How To Properly Pack Your Dry Herb Vaporizer Come along with your pals at Exxus Vape as we take a look at the art of packing ones dry herbs into their vaporizer, ... how-to • 4 min Explore → How to Store Wax Concentrates How-To How to Store Wax Concentrates Avoid exposing wax concentrate to high temperatures, as it can compromise its potency and flavor. Discover effective ... how-to • 2 min Explore → How to Choose the Right Dab Rig How-To How to Choose the Right Dab Rig Discover the perfect dab rig for your sessions by exploring portability, design, and aesthetics. Exxus Vape helps you... how-to • 2 min Explore →

AN OVEN, NOT A FLAME

Dry herb vaporizers heat loose material in an oven and never put a flame to it. Nothing is set alight, so what you draw carries the character of the material rather than the character of smoke. The trade has always been size, since ovens and the cells that drive them take up room, and this is where Exxus Vape went the other way.

The Mini is the smaller of the two: an inch wide and four inches tall, roughly the footprint of a marker pen, with an anodized heating chamber and a mouthpiece air path shaped to bring the vapor temperature down before it reaches you. Warm up is about 30 seconds. It tops out near 410 degrees, which is high enough for a full draw without pushing into the range where flavor falls apart. The Mini Plus holds the same four by one inch body in the same aluminum and gunmetal, and adds the details that make daily use easier.

  • Haptic feedback: the Mini Plus vibrates when it reaches temperature, so you are not watching a light to know when to draw.
  • Magnetic mouthpiece: pulls straight off for loading and cleaning and snaps back without threading. You preheat the Mini Plus with it removed.
  • Concentrate skillet: the Mini Plus chamber takes one, which makes it a crossover rather than a single material device.
  • Built to be carried: aluminum and gunmetal, light in the hand and hard to dent, which matters more on something you pocket than on something that stays home.

Grind does more for a session than any setting. Aim for an even, loose consistency. Too coarse and the heat never reaches the middle, too fine and it packs down and chokes the airflow. Fill the chamber and press it gently, no harder than that. Then let the device actually reach temperature before the first pull, because drawing early is the single most common reason a first hit feels thin. Start low in the range for flavor and step up as the session goes on.

Brush the chamber out with a dry brush every few sessions. Every couple of weeks, wipe the chamber, the screen and the mouthpiece air path with isopropyl alcohol on a cotton swab, then let every part dry completely before you put it back together. Residue in the air path is what makes a device draw tight. If vapor still looks thin on a clean, hot chamber, the material is probably spent.

Two devices, one footprint, and one of them doubling for concentrate. If concentrate is the main event rather than an occasional detour, look at concentrate vaporizers instead.

Frequently Asked Questions

How is a dry herb vaporizer different from smoking?

A vaporizer heats loose material in an oven and never applies a flame to it. Because nothing is set alight, what you draw carries the character of the material rather than the character of smoke. Most people notice the flavor difference immediately.

How finely should I grind before loading?

Aim for an even, loose consistency rather than a powder. A vaporizer heats the surface of what you load, so a fine grind exposes far more surface and gives a fuller draw. Grind it to dust, though, and it packs down tight, chokes the airflow and scorches.

How full should I pack the chamber?

Fill it evenly and press it down gently, no more. Air has to move through the whole load for it to heat evenly. A chamber packed hard will draw badly and cook only the outside, and a chamber packed too loosely wastes half the oven.

How long does the Mini take to heat up?

About 30 seconds. On the Mini Plus, the haptic vibration tells you when it is there, so you do not have to guess or count. Drawing before the oven is up to temperature is the most common reason a first hit feels thin.

What temperature should I run?

The Mini reaches up to 410 degrees. Lower in that range tends to give lighter, more flavorful vapor, and higher gives thicker, denser draws with less nuance. Start low, and step up through the session as the material gives up more of what it has.

Can the Mini Plus handle concentrate?

Yes. Remove the magnetic mouthpiece, load your concentrate into a concentrate skillet, place the skillet in the chamber and reattach the mouthpiece. It is a genuine second mode rather than a workaround, though a dedicated concentrate device will still outperform it.

How do I clean a dry herb chamber?

Brush the loose material out with a dry brush after every few sessions. Every couple of weeks, wipe the chamber, the screen and the mouthpiece air path with isopropyl alcohol on a cotton swab, then let every part dry completely before reassembling. Residue in the air path is what makes a device draw tight.

Why does my vapor look thin?

Work through the usual four. The material may be too coarse or packed too loosely, the chamber may not be up to temperature yet, the air path may be clogged with residue, or the material may simply be spent. Draw slowly and steadily rather than hard, since a fast pull moves air through faster than the oven can heat it.

Is the Mini small enough to carry every day?

It is an inch wide and four inches tall, which is close to the size of a marker pen, and the body is aluminum and gunmetal rather than plastic. It sits in a jacket pocket comfortably and survives being carried around loose in a bag.

Why Shop With Exxus

Straightforward reasons to buy your next Exxus device straight from the source.

🛡️
Straight From Exxus

Every device ships direct from us, so you get authentic Exxus hardware, never a clone or gray-market copy.

🔒
Verified at Checkout

Every order clears age verification, so checkout stays compliant for age-restricted products.

🚚
Quick, Trackable Shipping

Orders move fast with tracking on every one, so you can follow yours to the door.

🧰
Backed by Warranty

Register your device and it is covered by Exxus's warranty, plus a support team that actually answers.

📚
Help When You Need It

Setup walkthroughs, care tips, and quick fixes in the Resource Center to keep you rolling.

🌿
Built to Keep Up

Rugged Exxus vaporizers made to handle dry herb, concentrates, and oil cartridges alike.

Recently viewed